CORTEXA
← Browse
crossrefJournal of Sensor and Actuator Networks2023-05-26Cited by 6

Machine-Learning-Based Ground-Level Mobile Network Coverage Prediction Using UAV Measurements

Naser Tarhuni, Ibtihal Al Saadi, Hafiz M. Asif, Mostefa Mesbah, Omer Eldirdiry, Abdulnasir Hossen

Future mobile network operators and telecommunications authorities aim to provide reliable network coverage. Signal strength, normally assessed using standard drive tests over targeted areas, is an important factor strongly linked to user satisfaction. Drive tests are, however, time-consuming, expensive, and can be dangerous in hard-to-reach areas. An alternative safe method involves using drones or unmanned aerial vehicles (UAVs). The objective of this study was to use a drone to measure signal strength at discrete points a few meters above the ground and an artificial neural network (ANN) for processing the measured data and predicting signal strength at ground level. The drone was equipped with low-cost data logging equipment. The ANN was also used to classify specific ground locations in terms of signal coverage into poor, fair, good, and excellent. The data used in training and testing the ANN were collected by a measurement unit attached to a drone in different areas of Sultan Qaboos University campus in Muscat, Oman. A total of 12 locations with different topologies were scanned. The proposed method achieved an accuracy of 97% in predicting the ground level coverage based on measurements taken at higher altitudes. In addition, the performance of the ANN in predicting signal strength at ground level was evaluated using several test scenarios, achieving less than 3% mean square error (MSE). Additionally, data taken at different angles with respect to the vertical were also tested, and the prediction MSE was found to be less than approximately 3% for an angle of 68 degrees. Additionally, outdoor measurements were used to predict indoor coverage with an MSE of less than approximately 6%. Furthermore, in an attempt to find a globally accurate ANN module for the targeted area, all zones’ measurements were cross-tested on ANN modules trained for different zones. It was evaluated that, within the tested scenarios, an MSE of less than approximately 10% can be achieved with an ANN module trained on data from only one zone.

View free PDFSource page

Related papers

crossrefJournal of Sensor and Actuator Networks2026-05-27

Automatic Fault Detection and Prediction of AGV Magnetic Track Using Machine Learning and Computer Vision

Jules Bekoka Botomba, Akhlaqur Rahman, Daniel T. H. Lai, Vishal Sharma

The rise of Industry 4.0 has accelerated the adoption of intelligent automation in high-throughput manufacturing environments. Automated guided vehicles (AGVs) rely heavily on magnetic guidance tracks, which are susceptible to wear, contamination, and structural degradation. Thes…

View free PDFSource page
crossrefJournal of Sensor and Actuator Networks2024-11-23Cited by 7

Machine Learning-Based Structural Health Monitoring Technique for Crack Detection and Localisation Using Bluetooth Strain Gauge Sensor Network

Tahereh Shah Mansouri, Gennady Lubarsky, Dewar Finlay, James McLaughlin

Within the domain of Structural Health Monitoring (SHM), conventional approaches generally are complicated, destructive, and time-consuming. It also necessitates an extensive array of sensors to effectively evaluate and monitor the structural integrity. In this research work, we…

View free PDFSource page
crossrefJournal of Sensor and Actuator Networks2024-09-04Cited by 59

Machine-Learning- and Internet-of-Things-Driven Techniques for Monitoring Tool Wear in Machining Process: A Comprehensive Review

Sudhan Kasiviswanathan, Sakthivel Gnanasekaran, Mohanraj Thangamuthu, Jegadeeshwaran Rakkiyannan

Tool condition monitoring (TCM) systems have evolved into an essential requirement for contemporary manufacturing sectors of Industry 4.0. These systems employ sensors and diverse monitoring techniques to swiftly identify and diagnose tool wear, defects, and malfunctions of compu…

View free PDFSource page
crossrefJournal of Sensor and Actuator Networks2024-08-03Cited by 20

Smart Stick Navigation System for Visually Impaired Based on Machine Learning Algorithms Using Sensors Data

Sadik Kamel Gharghan, Hussein S. Kamel, Asaower Ahmad Marir, Lina Akram Saleh

Visually Impaired People (VIP) face significant challenges in their daily lives, relying on others or trained dogs for assistance when navigating outdoors. Researchers have developed the Smart Stick (SS) system as a more effective aid than traditional ones to address these challe…

View free PDFSource page
crossrefJournal of Sensor and Actuator Networks2024-05-28Cited by 3

A Learning-Based Energy-Efficient Device Grouping Mechanism for Massive Machine-Type Communication in the Context of Beyond 5G Networks

Rubbens Boisguene, Ibrahim Althamary, Chih-Wei Huang

With the increasing demand for high data rates, low delay, and extended battery life, managing massive machine-type communication (mMTC) in the beyond 5G (B5G) context is challenging. MMTC devices, which play a role in developing the Internet of Things (IoT) and smart cities, nee…

View free PDFSource page
crossrefJournal of Sensor and Actuator Networks2024-02-07Cited by 22

Network Sliced Distributed Learning-as-a-Service for Internet of Vehicles Applications in 6G Non-Terrestrial Network Scenarios

David Naseh, Swapnil Sadashiv Shinde, Daniele Tarchi

In the rapidly evolving landscape of next-generation 6G systems, the integration of AI functions to orchestrate network resources and meet stringent user requirements is a key focus. Distributed Learning (DL), a promising set of techniques that shape the future of 6G communicatio…

View free PDFSource page